Tuesday, 27 August 2019

RRCAT Recruitment 2019 www.apprenticeship.gov.in Apprentice – 70 Posts Last Date 20-09-2019

Advertisement
Government of India
Department of Atomic Energy
Raja Ramanna Centre for Advanced Technology
Indore, Madhya Pradesh

Advertisement No. RRCAT-5/2019
Trade Apprenticeship Scheme at RRCAT (TASAR)
Engagement of Trade Apprentices under Apprentices Act 1961



Advertisement Detail:

  1. Applications are invited for engagement of 70 numbers of Trade Apprentices under extant provisions of Apprentices Act, 1961 and Apprenticeship Rules, 1992 at Raja Ramanna Centre for Advanced Technology, Indore, Madhya Pradesh. The date of commencement of the batch is 15th October, 2019. The duration of the apprenticeship is 1 year for all the trades listed in Table-1. The trade apprenticeship scheme at RRCAT is a part of National Apprenticeship Promotion Scheme (NAPS).
  2. Facility for submission of online application will be available from 1000 hours of 26/08/2019 to 1500 hours of 20/09/2019 on RRCAT Apprenticeship Portal.
  3. The reservation for Scheduled Castes (SC), Scheduled Tribes (ST) and Other Backward Classes – non-creamy layer (OBC-NCL) will be as per the extant provisions of Apprenticeship Rules 1992.
  4. Efforts will be made to reserve places for SC, ST and OBC (non-creamy layer) in each trade as per the ratio / percentage suggested in extant provisions of Apprenticeship Rules 1992. However, it may not be always possible to implement this policy if the number of training places in a trade is small. In such cases, training places will be reserved on the basis of total number of apprentices in all designated trades. Out of 70 training places, 10 are reserved for SC, 14 are reserved for ST and 10 are reserved for OBC (non-creamy layer only).
  5. If the number of candidates belonging to the Scheduled Castes is insufficient to fill up the training places reserved for them, then the shortfall may be filled by the candidates belonging to the Scheduled Tribes. Similarly, if the number of candidates belonging to the Scheduled Tribes is insufficient to fill up the training places reserved for them, then the shortfall may be filled by the candidates belonging to the Scheduled Castes. If some training places reserved for either Schedules Tribes or Scheduled Castes or both are still left unfilled, then these training places may be filled by candidates not belonging to the Scheduled Castes and the Scheduled Tribes.
  6. If the number of candidates belonging to Other Backward Classes (non-creamy layer) is insufficient to fill up the training places reserved for them, then the shortfall may be filled by candidates not belonging to the Other Backward Classes (non-creamy layer).
  7. Age Limits: The date of birth of the candidates shall be between 15/10/1997 and 14/10/2001.
  8. Amount of Stipend: As stipulated in Apprenticeship Rules – 1992. At present it is ₹7750/- per month for all apprentices irrespective of the trade. This may be revised as per the notified minimum monthly wage for a semi-skilled worker in the state of Madhya Pradesh prevailing on October 15, 2019.
  9. Apprentice Registration: All aspiring candidates must be registered on NAPS portal www.apprenticeship.gov.in.
  10. The designated trades along with the no. of apprentices are indicated below:
Table-1: List of trades, number of training places and minimum qualification

#
Designated Trade No. of apprentices Qualification - Passed ITI in the trade of
1. Fitter
17
Fitter
2. Machinist
3
Machinist
3. Turner
3
Turner
4. Draughtsman (Mechanical)
3
Draughtsman (Mechanical)
5. Welder (Gas and Electric)
3
Welder (Gas and Electric)
6. Mechanic Refrigeration and Air Conditioning
2
Mechanic Refrigeration and Air Conditioning
7. Surveyor
1
Surveyor
8. Plumber
1
Plumber
9. Carpenter
1
Carpenter
10. Mason
1
Mason
11. Electronics Mechanic / Instrument Mechanic
20
Electronics Mechanic / Instrument Mechanic
12. Electrician
8
Electrician
13. Electroplater
2
Electroplater
14. Computer Operator & Programming Assistant
3
Computer Operator & Programming Assistant
15. Computer Network Technician
2
Computer Network Technician
Total
70
  1. Application process:

    1. Candidates shall register themselves at NAPS apprenticeship portal http://www.apprenticeship.gov.in/ which is the official web portal of Government of India’s Ministry of Skill Development and Entrepreneurship for trade apprenticeship in designated trades.
      Candidates shall fill up all the data including their Aadhaar number correctly. Candidates shall also upload scanned copies of the following originals at the NAPS apprenticeship portal while registering:

      1. Date of Birth certificate / 10th class passing certificate
      2. 10th class mark-sheet in “Academic Qualification”
      3. ITI certificate in “Technical Qualification”
      4. Photograph
      5. Signature
    2. Candidates must register at RRCAT apprenticeship portal after registering at NAPS apprenticeship portal. Only online applications will be accepted through RRCAT Apprenticeship Portal. Registration number issued by NAPS apprenticeship portal is mandatory for applying through RRCAT apprenticeship portal.
    3. Submission of fraudulent and wrong information on the RRCAT Apprenticeship Portal is a serious criminal offence and is subjected to the provisions of the Indian Penal Code. It is strongly advised that such attempts shall not be made.
    4. Candidate should read the general instructions given in the advertisement carefully before making any entry or selecting any option. Candidate shall enter all the required details while filling up the online application form.
    5. Name and date of birth should be filled as in the Secondary School Certificate/10th Standard Certificate.
    6. Before filling application form, candidates should keep ready scanned copy of the following in jpg / pdf format in 300 kB file size for each document:

      1. Date of Birth certificate
      2. 10th standard board examination mark sheet and certificate
      3. ITI mark sheet and National Trade Certificate
      4. Aadhaar card
      5. Passport size color photograph
      6. Signature
      7. Caste certificate (if applicable)
      8. Disability certificate (if applicable)
    7. Candidate is required to fill up personal, educational and other details as per the documents available with him / her.
    8. Candidates shall immediately start the process of getting a police verification certificate of address mentioned on their Aadhaar cards. This will be required on the date of reporting for joining the apprenticeship scheme. There is no specified format for this certificate. The candidates may use formats prevalent in the locality.
    9. No request for change / correction in any particular in the application form shall be entertained under any circumstances after final submission of the application on the portal. Therefore, before clicking the submit button, the candidate is advised to check that all the details filled in are correct. Submission of wrong information will lead to disqualification.
    10. After final submission, the application form will be generated by the system. Candidates are advised to save the soft copy and take a printout of the application form generated by the system and keep it ready for future reference.
    11. Candidates are required to bring the print out of the application form during physical verification of the documents.
    12. Incorrect / incomplete online applications will be summarily rejected.


  2. Selection Procedure:

    The applications will be sorted on the following basis:

    1. Candidates shall have passed ITI either in 2017 or after 2017. Candidates who passed out ITI in 2016 or before are not eligible to apply.
    2. Candidates are required to apply for only one of the designated trades mentioned in Table-1. Candidate should possess ITI certificate in the respective trade mentioned in the last column of Table-1.
    3. In case insufficient applications are received in some of the trades then RRCAT reserves the right to increase the number of apprentices in some other trades so that the apprenticeship opportunity is extended to candidates of other trades. RRCAT also reserves the right to increase the number of training places up to 25% of the originally specified training places in aggregate subject to a capping of 10% of total number of employees of the organisation applied on the total number of apprentices engaged by the organisation.
    4. Candidates must have passed the 10th class board examination prior to taking admission in ITIs and secured a minimum of 50% in aggregate in 10th class board examination.
    5. The merit list will be prepared on the basis of ‘one third of percentage of marks in ITI’ and ‘two third of percentage of marks in 10th class’. The sum will be rounded off to two places of decimal. In case of a tie, a candidate having higher percentage of marks in 10th Class board examination will be accorded a higher rank.
    6. The merit list will be displayed on RRCAT Apprenticeship Portal on 25/09/2019.
    7. Candidates appearing on the merit list shall confirm their participation in the document verification process by 29/09/2019. A link for confirmation will be made available through email. The candidates shall check RRCAT Apprenticeship Portal and their emails regularly. All candidates who confirm joining trade apprenticeship scheme at RRCAT shall immediately start tracking the process of getting their police verification certificate of address mentioned on their Aadhaar cards. This is a mandatory document for joining the programme.
    8. A final merit list will be published on the RRCAT Apprenticeship Portal on 01/10/2019 based on the confirmations received and number of vacancies.
    9. Candidates appearing on the final merit list shall appear for document verification personally at RRCAT at 1000 hours on 07/10/2019. Following documents will be physically verified:

      1. 10th standard board examination mark sheet and certificate
      2. ITI mark sheet and National Trade Certificate
      3. Caste certificate (if applicable)
      4. Disability certificate (if applicable)
      5. Aadhaar card
      6. Police verification certificate of address mentioned on the Aadhaar card.
      7. Savings Bank Account Number and Pass book
      8. Hard copy of national apprenticeship portal registration confirmation email
      9. Hard copy of online application form
      10. elf-attested photocopies of all above mentioned documents
      11. Two recent passport size photographs.
    10. Medical examination of candidates will be conducted from 07/10/2019 to 14/10/2019.
    11. Online offer through NAPS apprenticeship portal will be issued to candidates on the spot after the physical verification of documents and medical examination of candidates. The candidates shall accept / reject the offer immediately.
    12. If some candidates do not appear for physical verification of documents or their documents are not found in order or they reject the offer; then the opportunity will be passed on to the next candidates in the merit list, on the spot.
    13. If a candidate, whose documents are found in order but fails to get an offer; then he / she will be placed on a waiting list. Such candidates may be given online offers at a later date.
    14. Candidates must report at RRCAT and join the apprenticeship programme on 15/10/2019 otherwise their candidature will be cancelled and their offer will stand withdrawn. No correspondence will be entertained in this respect. RRCAT reserves the right to permit late joining in deserving cases for such candidates who report on 07/10/2019 and undergo document verification and medical examination but are unable to join the apprenticeship from 15/10/2019 for some genuine reasons.
    15. Candidates from waiting list may be called for joining the apprenticeship batch in case vacancies exist due to (i) withdrawal of candidature or (ii) if some of the candidates, who have accepted the offer earlier but did not report at RRCAT on 15/10/2019. Such wait listed candidates will be given 7 days’ time to join.
    16. The waiting list will cease to exist after 10 days of commencement of batch.


  3. General Instructions

    1. No correspondence will be entertained with the candidates.
    2. Any form of canvassing will result in cancellation of candidature.
    3. No TA/DA will be paid for attending physical verification of documents or at the time of commencement of the apprenticeship.
    4. The engagement and training are strictly in compliance with the provisions of the Apprentices Act 1961 and Apprenticeship Rules 1992.
    5. Completion of apprenticeship training at RRCAT is not linked to employment at RRCAT. The process of employment at RRCAT is a separately conducted exercise in which the apprentice may participate if he or she is eligible.
    6. Those who have already attended the trade apprenticeship training elsewhere will not be considered.
    7. RRCAT will conduct its own medical examination of the selected candidates. A candidate will be assumed to have agreed to this condition by applying for a trade apprenticeship at RRCAT.
    8. Accommodation will not be provided to apprentices during the apprenticeship period. The apprentices shall make their own arrangement for accommodation. RRCAT is located in the municipal area of Indore city and shared / individual accommodations are easily available in nearby localities.
    9. Apprentices will have to organize their transport arrangement themselves.
    10. There is no arrangement of subsidized / free meals in RRCAT campus.
    11. RRCAT will conduct the trade apprenticeship with periodic assessments at a frequency and duration decided by the training In-charge. The apprentices must make efforts to learn the trade during the ‘on the job practical training’ with utmost sincerity and perform satisfactorily in the periodic assessments. It is assumed that the trade apprentices are acquainted with skills they learnt during their ITI training. A consistent bad performance in these internal assessments may lead to termination of the apprenticeship as per the extant provisions of Apprenticeship Act 1961 and Apprenticeship Rules 1992.
    12. The medium of instruction will be Hindi / English. Commonly used technical terminologies will be utilized during instructions irrespective of the medium of instruction.
    13. RRCAT is an establishment of Department of Atomic Energy, Government of India. It is governed by special provision like Atomic Energy Act 1962. The employees are civilian employees and are bound by the aforementioned act and CCS conduct rules 1964. In all matters of conduct and discipline, the apprentice shall be governed by the rules and regulations prevalent at RRCAT.
    14. Disrespectful, belligerent, dishonest, procrastinating and escapist behaviour of an apprentice will hamper the outcome of this training scheme. Therefore, if such things are brought to the notice of RRCAT authorities and the apprentice does not correct himself / herself even after three official memos then his / her apprenticeship may be terminated in consultation with Apprenticeship Adviser.
    15. Where the contract of apprenticeship is terminated for failure on the part of the apprentice to carry out the terms of contract, the apprentice shall refund to the employer as cost of training such amount as may be determined by the Apprenticeship Adviser. In such event, the apprentices shall not be entitled to enter into another contract of Apprenticeship under the Apprenticeship Act 1961 with any other employer.
    16. Every Apprentice who has completed the period of training shall appear for All India Trade Test (AITT) to be conducted by the National Council for Vocational Training (NCVT) to determine his / her proficiency in the designated trade in which he / she has undergone apprenticeship training.
    17. A certificate of proficiency in the trade will be issued by the NCVT on passing the AITT.

USER GUIDE for Filling Online Application Form for TASAR-2019
Compatible browsers
Microsoft Internet Explorer(IE) version 7+ and Firefox version 3.x browsers are compatible for this website. Lower versions of mentioned browsers may cause trouble in data mapping and application form processing. Javascript of browser should be enabled for this website. Acrobat PDF Reader version 6+ should be installed on your computer.
Read the following instructions carefully before doing User Registration for online application submission:
  1. User registration requires some of your personal details like Name, Gender and Email address .
  2. Carefully read age limit and selection procedure before online submission of application.
  3. Please enter valid, active and unique email address. After successful completion of User Registration step, you will receive further details on this email address for completion of online application submission.
Read the following instructions carefully before filling online application:
  1. Carefully read Application process.
  2. Candidate can edit application details and preview the application form before final submission of application.
  3. Candidate will have to enter credentials (Email-id and password) for completing the process of final submission for printing the application form.
  4. Only JPG files are allowed to be uploaded for coloured Photograph and Signature.
  5. For other documents(duly self attested) JPG/PDF files are allowed to be uploaded.
  6. Maximum file size to be uploaded is restricted to 300 KB.
  7. Print button and Final Submission button will be enabled only after entering marks details of ITI and SSC and uploading all the mandatory documents.
  8. Final submission of application will require authentication through OTP which will be sent on applicant's personal mobile no. and email.
  9. After completion of final submission, application details can not be modified.
  10. Only finally submitted applications will be considered for further processing.
  11. After Final Submission, candidates are required to generate a print out of the application which would be required to be produced at the time of document verification at RRCAT.
  12. Please use your registered email ID for future reference and correspondence.
  13. For any queries send mail to tasar@rrcat.gov.in
    किसी भी प्रश्न के लिए tasar@rrcat.gov.in पर मेल भेजें
Click Here To Apply Online For TASAR-19
Last date for online submission against ADVERTISEMENT NO.  RRCAT-5/2019 (TASAR-19) is upto 1500 hours of 20/09/2019.

0 comments:

Post a Comment